top of page

Programming Keyless Entry Fob

1.) Close hood, trunk, and all doors.

 

2.) Make sure the key is out of ignition.

 

3.) Open the drivers door and leave it open.

 

4.) Put the key in ignition and turn ignition on and off 3 times leaving the ignition off on 3rd time.

 

5.) Press the open door switch on the drivers side three times or close and open the drivers door 3 times leave it open on the 3rd time.

 

6.) The RX-8 will lock and unlock this means remote is able to be programmed.

 

7.) Push any button on keyless remote lock or unlock 2 times.

 

8.) The RX-8 will lock and unlock.

 

9.) Close the driver door and remove key from the ignition.

 

10.) Test the key fob for functionality 

bottom of page